Review on VCE Combos Degree Vertical Adapter by Glen Braudrick

Cords ran from the TV in my living room and then down the (open) wall to the small shelving system we installed with our Spectrum and PS4 box. Neither my wife nor I like exposed wiring, but we moved and there were no wires in the wall; Only 110V duplex socket behind the TV. After working on other projects for 4 months, I decided it was time to take on this one. Here's how it went: I used an HDMI coax ethernet wall plate on the wall next to the shelving system, plugged a vertical HDMI flat adapter into the back of that outlet to reduce cable stress, and the Aurum Ultra High Speed HDMI cable routed. with Ethernet 20 feet up the wall, a few feet in the attic, then behind the TV to the hole. Then I enlarged the one gang hole to a two gang hole, put in a 2 gang multipurpose drywall mount, turned off the breaker and plugged the power cord into 2x 15amp dual 2.4amp sockets -USB charging ports with LED light, IQIAN 4 HDMI HDTV + 1 CAT6 RJ45 Ethernet + TV Coaxial Cable Type F Keystone Front Panel White 110V Socket I then used the same HDMI angle adapters as before to reduce cable stress and electrical tape used to attach the whole thing to the keystone plate HDMI distortion. I connected the Cat5 cable, installed the trapezoidal plate in the two mailboxes and covered it with the plate. EVERYTHING WORKS! Too bad all the work that has been done is not really visible. But that's the point, isn't it?