Review on Quiet Full Tower Computer Window BGW15 by Haraki Itsuki ᠌

China is still being felt. some bolts can not be unscrewed or screwed, distortions in some joints of structures. The power supply housing is generally a nightmare. fastened completely stupid and deaf for some reason. - I still didn’t like the space for wires, there is little space and it’s inconvenient to lay a 24-pin. - There is really nowhere to lay the RGB backlight, but the worst thing is that you can’t actually see it, since there are very deep sides around the perimeter. Now I’m thinking what to put under the LEDs so that they are closer to the glass. - The biggest drawback is the lack of the possibility of vertical installation of the video card. - Huge uncovered holes in the upper part of the case lead to the throwing of hot air back, to come to plug and . - a stupid casing that covers the wires and the power supply cannot be inserted and pulled out normally, especially with CBO on board. - there are no handles to lift this coffin assembly - the front panel with gratings for the DVD drive is just a nightmare and spoils the whole appearance, because of this it will be a complete horror to remove the door. - thick-walled radiators (from 40 mm) do not fit normally. HDD cages do not fit with them, and it is impossible to install anything on the back wall. - stiletto doors just suck and last century. - with my reservoir, and also because of the box at the bottom, it is impossible to install the video card vertically, even if it is a . - there is nowhere to lay LED strips, you can’t stick them at all from below and behind. - due to useless wireless charging, it is impossible to put 3 140 mm coolers on top and a normal radiator of only 120 mm or 2 * 140.