Review on 🌬️ GIM KB-24 RGB Case Fan 120mm Fan Single Pack: Optimum Cooling Solution with Customizable RGB Lighting by Hassan Tomlinson

Hello. Just wanted to thank you for being part of our first PC build and showing you the pieces that came together so you can see how your product helped complete the build. Your revived PC. Easy installation, quiet and enjoy the show. Many Thanks. As a beginner builder, they were very affordable and easy to install. As a tip, pre-install the included screw to make thread grooves for the screw in the plastic of the fan to facilitate actual installation into the case. 3-pin 5V ARGB connector (make sure you don't connect it to 12V) to the motherboard and connect it through the hub (the hub also has RGB) for a total of 10 fans (5 connectors on each long side of the hub and you can buy 2 additional ARGB strips from GIM to plug into one end of the hub, the other end is for the SATA power connector and for the 5V 3 pin connection to the motherboard bought 2 sets, total 6 fans, and only needed 1 hub and 1 remote. Since the unit is available for the price, the other set is now a redundant hub and remote. You can use the motherboard software to control the RGB to synchronize, but in this case the HF controller has to fail Box is used first and can be played with very well. RGB is very bright and can be regulated by brightness, fan speed adjustable, very quiet, many smooth color patterns, as in photos and videos to see Other Re Reviewers have reported issues, luckily all is well within a month of use but at an affordable price, a great set to consider. Have fun and enjoy building a PC.