Review on 🖼️ Craig Frames 1WB3BK 18x24 Inch Picture Frame, Sleek Wrap Finish, 1" Wide, Black by Gina Robinson

Simple black frame for everyday use. I am an amateur photographer who sometimes manages to get a photo that is "worth a brick wall". I love printing my favorite shots onto 13x19 paper and these are the perfect simple black frames to work with. They come with a protective plastic over the plexiglass, so the first step is to remove that coating. Have a clean rag handy when you do this, which greatly reduces the time it takes to wipe fingerprints off Plexiglas. After removing the cover and thoroughly cleaning the plexiglass, place the plexiglass back in the frame, add the photo, then the cardboard, then carefully check if there is dust on the inside of the plexiglass and fold the metal tabs back down to hold it. everything is available. Be sure to check for dust and stains *before bending back the metal tabs as you can only bend these tabs a limited number of times before they break. Then a hanger: it comes with two screws, two cord holders, a length of lightweight metal cord, and a picture hanger that you nail to the wall (and tie the cord together). The suspension does not come already attached to the frame. You should install the hangers after deciding how you want to hang the frame - landscape or portrait. All you need is a Phillips screwdriver and a tape measure. Wire cutters are good if you want to snip excess cord (that's about twice as long as you need), although the cord is light enough to cut with a good pair of scissors. These are the frames to buy if you want a nice clean look - nothing out of the ordinary and nothing to break the bank.