Using the materials and instructions provided, the processor does not come in contact with the heatsink. To ensure the CPU makes contact with the heatsink I had to use a pad for the eMMC chip and double the CPU otherwise I could clearly see the other side when everything was assembled. I had to redo 5 blocks and will probably do it again once I get new spacers. The radiator is shaped to come into contact with critical Cm4 components after the gaskets are installed. There's even enough room at the top to add a fan later if needed. A NOTICE. Someone wrote "x2pcs" next to the little controller chip to tell us to use two pads there. NOTE 2: They should have included an extra pad for the CPU - 1 no reply to email - 1 the CPU is not in contact with the heatsink and/or it doesn't need to route eMMC for it to work.
Samsung 970 EVO Plus 1TB SSD? NVMe M.2 SSD
31 Review
Maximize Your Performance with Thermal Grizzly Kryonaut Grease
15 Review
Netac NV7000 NT01NV7000-1T0-E4X SSD, M.2, 1.0Tb, PCI-E x4, Read: 7200 Mb/s, Write: 6800 Mb/s, 3D NAND, 1400TBW, NVMe
11 Review
Cooler ID-Cooling SE-224-XT White (Intel LGA2066/2011/1200/1151/1150/1155/1156// AMD AM4)
26 Review