Review on LIFT 60817 1000 Air Spring by Alfredo Nosrac

Excellent product. So easy to install. I have a 2015 JKU without a lift. I needed something to get the back to it's original height because I have a few tools in the back. I didn't have to remove the rubber. I placed a quick jack under the hitch just in front of the tire. Then I lifted the car until the tire was about an inch off the pavement. I then jacked up the car to be on the safe side. First, compress the bag as instructed. Then put between the coils. Remove the teat cover to roll up the bag into rolls. Feed the air hose through the top case bracket, through the black gasket, and then connect the air hose to the bag nipple. Pull out the air hose and place the seal on top of the bag. Route the duct from the exhaust and return to where you want to attach it. I used a piece of aluminum angle that bolts to the underside of the rear bumper to install the Schrader valve fitting. I use 10psi to bring the back up to the standard height. It took about an hour.