Review on 20W 36In Dimmable LED Under Cabinet Task Lighting, CRI>90, 3000K Soft White Wide Body Metal Base With Frost Lens by Ismael Hennigan

Here how to install. Just follow the instructions in the new LED package. Turn off the circuit breaker for the old tube fat bulb lamp. Took down the ancient fat bulb 18 inch tube lamp. Take the bulb out, than two screws to get the cover off, than two screws to release the base from the ceiling area, and than take off the three wire nuts, hot, neutral and ground. Pop out one of the wire ports on the LED base, the closest to your wire source, put up the LED base with two screws, I used four because I was on just thin paneling, pull the three wires through the wire port, attach the color to color matches, and the ground wire with three new wire nuts, pop the LED base back on, pop on the LED lens cover, check that all is correct, and go turn the circuit breaker back on, and turn the toggle switch on the LED to ON position and GREAT LIGHT. Took about 45 min with all the gathering of materials, tools, figuring out the correct breaker. Popping off the LED base and LED lens cover is easy after one does it, just follow the included paper directions about where and what to press, just have to use some firm pressure to pop off.