Review on 🚗 Ultimate 3D Speed Car Polish & Wax - 16oz: Revitalize & Protect your Vehicle with All-in-One Scratch Removal, Swirl Correction, and Wax Coating by Justin Castro

The best AIO I have ever used. As a retailer, I use an AIO product from a very large direct seller that ships to retailers; However, this product is much better. I have used this on a private vehicle and the results have been outstanding. Super shiny shine as advertised. I followed the instructions exactly. We use a 6" DA random orbital polisher - HD recommends using this. I used an orange pad to correct some surface imperfections. According to the instructions, I used very little of the product. The product can be removed quickly and easily with a clean microfiber cloth. Here are some tips to help you use this product: Firstly the contents were quite thick and I stood the bottle on black asphalt for 20 minutes before shaking and applying the product - the bottle is black so it absorbs heat . After shaking the heated bottle, the product was of perfect consistency. Before applying the product to the pad for the first time, I sprayed the pad with a fine mist of water. I put on disposable gloves as advised and spread the product over the pad with a gloved finger with each application - this virtually eliminates slipping (spreading the product on other surfaces). If you are treating black rubber and plastic surfaces, do so before applying this product (if you apply an HD product to plastic or rubber it will not show). Only use silicone based products on black plastic or rubber (which I cut with 50% water to avoid ultra high gloss). I also washed the car very thoroughly and used Detailing Clay. Clay must be used with a suitable lubricant. I always use a new pad for each car - it takes too long to clean the old pad and the old pad can leave marks on the car's surface if not cleaned properly. Finally, don't buy a large product unless you're a professional conditioner - fresh product works best.