Review on Fellowes CF 230 AP 230PH Purifier 9372001 by Razz Hieb

Activated Carbon Filter 9372001 fits my Fellowes AP-230PH Air Purifier perfectly. After 3 months of 24/7 use the filter change light came on so I changed the filter. The filter is definitely doing its job. There was a lot of dust and hair on the front panel. Before changing the filter, I turned off the unit by pressing the "Power" button on the top front panel. Don't forget to turn your device back on when you're done. From the Fellowes website: The charcoal filter is a pre-filter that traps larger particles to avoid clogging the HEPA filter. The activated carbon filter is designed to remove VOCs (volatile organic compounds) from the air. Fellowes carbon filters are also treated with Sanitize TM (an antimicrobial agent that prevents the growth of microbes and contaminants on the filter). To access the filters, grasp the lower left and right sides of the white and silver front of your air purifier. and gently pull it towards you. Lift to fully detach and gain full access to the filters. To change the filters: After removing the front panel, gently pull the filters toward you to remove them from the air cleaner. When installing or replacing filters, install the HEPA filter (thicker white filter) first, and then the carbon filter (thinner black filter). How do I turn off the "change filter" light on my air purifier? Remove the front panel from the device by grasping the lower left and right sides of the panel and gently pulling the front panel towards you. There is only one filter change button for HEPA and activated carbon filters. By pressing the filter change button for one second you can toggle between the HEPA filter and charcoal filter icons to choose which one you need to reset. Press and hold the "Change Filter" button for 3-5 seconds until you hear a beep. The Replace Filter indicator should go off when the beep sounds.