Review on 👉 JQK 12 Inch Oil Rubbed Bronze Towel Bar - Rustic Stainless Steel Towel Rack Wall Mount for Bathroom - 15 Inch Total Length (TB110L12-ORB) by Cristina Zane

Well I'm writing a real review about this heated towel rail. Made from high quality not cheap casting. Continuous. Well done. Includes all hardware needed for drywall installation. Two types of drywall anchors (screw type I recommend and expandable plastic I wouldn't use), screws and an Allen wrench for the backplate. The only thing that would make installation easier would be a template and if they give you measurements for spacing. I assume they use the same guide for all lengths. Incidentally, the distance for a 30 foot rod is 30 1/2 inches, which is an odd number as it precludes hitting two pins. I'd say overall it would be better if they made these bars a little longer so the bracket spacing is 32 inches, at least for the US market. The instructions are short but readable and accurate. The rod comes in a very soft sleeve that protects the finish well. I used a board to level the mount, marked the bottom of each mounting piece, removed the mounting brackets, and measured 1/2" from the bottom mark for the bottom hole on the mount. This worked fine for me. Check your level and use the lowest bit to see if you have a bobby pin. I arranged mine to hook the bobby pin to one end. If you're concerned someone might use the board as a handrail, buy a drywall molly for the other end.They need a bigger hole but they are much stronger.Overall this is a good product and looks nice on the wall.