Review on 🔌 250-inch One-Cord Channel Cable Concealer - Cord Cover Wall Cable Management System - Cable Hider Cable Raceway Kit for Power Cords, Ethernet Cables, Speaker Wires - 16x L15.7in W0.59in H0.4in by Jeff Bridgewater

The product was suitable for my use with a ring-shaped indoor camera. I needed about 15 feet so I bought this larger one and I have some leftovers. I also had to purchase a 15ft cable to avoid splices along the route and for a seamless look. These rails are not suitable for fork ends. Take this into account when planning your route. I used a small serrated hacksaw to cut the pieces, but a dremel will also work. I didn't use straight connectors, just attached the rails to the wall to make them look more seamless. The tape provided worked well, not as strong as the 3m but it peeled the paint off when I tried to straighten one. Paths, so be careful when you stick to the wall sometimes. Tip: Don't run the tape all the way around as you won't have enough tape. I cut 1" wide strips and fasten them at the ends and in the middle. This larger one comes with 2 rolls of tape but I didn't have to go far. All in all I recommend this product. Measure the spacing required and plan for it Transfer to the ceiling or another wall as appropriate.Remember the 5 P principle "Proper planning prevents poor performance. In the future I plan to do a little sanding and paint to match the wall. Good luck everyone !