Review on Filter Sicce Shark ADV 800 by Edyta Cioch ᠌

The filter is overrated . it feels like it was assembled during the formation of the Chinese economy With its pros: Durable suction cups (attachment to glass), the convenience of attaching the filter to the part that is placed in the aquarium. circular suction of water - takes it from all directions. ease of detaching parts of the filter for cleaning (but there is a nuance, see below) convenient (for my aquarium) angle of water direction - at an angle down and does not disturb the water on the surface. Different cons: A lot of. Perhaps considered as nit-picking, but nevertheless the general picture is this: 1. In order to insert the complete suction cups into the plastic holder, you will have to try and use something to push them into the holes 2. A piece of a complete silicone tube for air intake is also not inserted into the filter without preheating in boiling water 3. The nozzle tube that directs the flow of water - is put on but in fact dangles freely 4. It is virtually impossible to regulate the flow of outgoing water - the sector of rotation of both the nozzle itself and the filter is too small 5. Between the fastening of the upper and middle parts of the filter (where the rotor is and access to it) there is a small gap into which water is also sucked. Uncritical, but a part of a leaf of a plant can stick there. This creates an overall impression of the "accuracy" of the entire filter. 6. Also covers with magnets that cover the filter containers. You will not immediately understand how to remove them (the inscription "push me") and how to insert them back later. They are inserted into the spacer, but thoughts arise - after what time these covers will loosen and will not hold. 7. When the aerator is running, the filter becomes very noisy. 8. Pulling the filter out of the water, all the water pours out of it and everything that it "sucked" but that did not fix there will pour back into the aquarium. Those. all fine turbidity, so the filter cleaning procedure becomes more complicated, you have to take a plastic bag and first put it on the filter and only then unfasten it 9. Flash on some plastic parts (adaptive spout and closing bottom part that regulates water intake)