I came in and it doesn't fit my Ford, maybe it's my fault for not doing a little better research. So I had to order another cover for my Ford and it didn't fit without machining the cover as it was too large in diameter to fit the master cylinder bore. I just replaced the master cylinder and most likely it was from China and the problem could be there and not the pumping. After modifying the cap and it fitted fine without the o-ring, I put the o-ring on and was still having trouble fitting the cap into the tank as the o-ring did not fit as the tank was sharp Edge around the hole where the cover goes. So I had to deburr the tank and taper the o-ring first. Still no joy as the "O" was too big, I had set the "O" and chose the smaller "O" and success. I also added a quick disconnect to the hose so I can switch the hose from one to the other with no fuss. All in all I ended up really liking the prime pump and as the caption says I couldn't have done the job in my RV without it. After all the work I have a very good instrument that I will enjoy for a long time.
🔧 Lang Tools 279-5420 279 Brake Caliper Press: The Ultimate Solution for Efficient Brake Caliper Maintenance
9 Review
🔧 Adjustable Engine Cylinder Hone Tool - EWK 1-1/4 to 3-1/2 Inch 3 Stones, Deburring Piston Honer with 220 Grit
9 Review
JQuad Safety Orange Powder Caliper
9 Review
ABN Brake Drum Tool Kit - 15-Piece Service Brake Kit with Spring Pliers, Brake Spoons, Pad Gauge, Brake Spring Tool
9 Review
Bit and socket set Stels Tool set, 1/2", 1/4", CrV, plastic case 94 pcs, Stels, 94 pcs, black
46 Review
Rechargeable screwdriver OA-3,6F (433.0.2.00), 3.6 V, 1.3 Ah Li-ion, blister
46 Review
Reversible Mi 16-in-1 Ratchet Screwdriver
21 Review
Xiaomi Mijia Ratchet Screwdriver 16 in 1 Screwdriver with Interchangeable Bits, 10 pcs, Black
22 Review