Review on 🔊 Bimiti 36 Inch Universal Wood Grain Speaker Stands - Pair of Heavy Duty Hollowed Floor Stands for Home Theater Speakers with Sand Filling Tuning Function by Rodney Gonzalez

The coasters look good and match the furniture in my room. height just right. But the designers did not pay close attention to details and left much to be desired. First of all, if you plan to install these coasters on a carpet, be prepared to spend an additional $40 to get a set of 8 sharp spikes and 8 screw converters (8mm x 1.25 to 6mm x 1.0). to buy. The included metal "legs" are useless on carpets. They have round balls at the ends and cannot penetrate the carpet fabric and touch the hard surface underneath. As a result, the frames literally "sit on a sponge” and sway slightly. This will seriously affect the performance of the speakers. Secondly, the chipboard used for the manufacture of stands, light and low density. They are too soft to attach securely with screws. This gives you a chance to drill through the screws. After you remove the screw, the hole is too loose to put the screw back. Third, the opening of the pre-drilled screw holes is too large. wider than the supplied screw heads. Washers must be used for proper installation. Luckily I saved a few spare discs from other projects. delivered. Washers must be used for proper installation. Luckily I saved a few spare discs from other projects. delivered. Washers must be used for proper installation. Luckily I saved a few spare discs from other projects.