Review on Organize Your Airbrush Setup With OPHIR'S 4-In-1 Airbrush Holder Station And Manifold by Michael Domus

The only thing I could find wrong with this is that the tiny little labels on the valve heads are backward. they indicate clockwise (open) and anticlockwise (close). when the reality is the reverse of that. This has zero impact on actual function but is a momentary confusion.There is a small hose loom that comes with it that is intended to mount below the air inlet port.When a pretty much normal hose with a crimped ferral is used, the ferral prevents the hose from mounting correctly. The hose loom has zero function and can just be tossed out.If you really just can't live without having all 5 hoses draping pretty from one point, you could use a plastic cable tie to accomplish the same result.All of the important bits work and they work very very nicely.The aesthetic appearance is outstanding.The manifold block is clean and free of burrs and the valves function smoothly.The clips hold an airbrush very nicely and they allow for any airbrush of which I'm aware, with either gravity fed or siphon fed cups.It could possibly have a problem with very large siphon feed bottles due to limited clearance between the airbrush holders and the manifold block, but the 1.5 ounce bottle works reasonably well.