Review on 🚗 RP Remarkable Power Complete Fog Light Kit for 2012-2015 Tacoma Pickup Truck, including Switch Wiring and H11-12V 55W Bulbs FL7117 by Mark Taylor

I looked at several fog light options and settled on this one. The wiring harness was perfect. I was able to run cables from the front of the truck to the factory site. Toyota had blank inserts in the fog light mounting points, so I swapped them out without needing "fog light covers" (frame?). They fit well and I was able to fit the relay into the existing threaded hole on the side of the engine bay. The relay and wires for ground and battery were the perfect length to route the wires to keep the setup looking clean. Instead of pushing the switch head through the firewall, I cut the wires and just ran a few wires through the firewall. I then reconnected them once I had the wires next to the switch. I've seen tutorials on removing the fairing pieces to get to the switch location, but I was able to use a wire hanger and gently push the switch hole down to the fuse box. Judging by other reviews, I was concerned about the switch itself. I had no issues with the switch and no modifications were required to fit it in the slot I chose. After testing that the fog lights were working properly, I was able to reattach them. I was very happy with how everything turned out. In the above images you can see that the amber light is one when the ignition is on and the fog light indicator is on when the fog lights are on. Very happy with how everything turned out. I would recommend this kit for a 2nd generation Tacoma.