Review on 📺 Organize and Mount Your Roku Device with TotalMount's Roku Mounting Shelf and Remote Holder (Roku 3, Roku 2, Roku 1 Compatible) by Rhonda Rrain

Purchased for Roku 3 to connect to Sony KDL-40L350R TVs. Installed on the back top. Good quality product. Well packaged, excellent clear and concise instructions. Great that it came with a remote control bracket. Since the Roku 3 can be controlled with an iPhone, I stow the remote behind the left edge of the TV. I subtracted a star because the front edge of the mount that the Roku plugs into can be about 1/8 inch. further to allow the Roku to slide fully. The rim is for holding the device. The mount still works and the unit stays inside but may slide forward from the adjustment cord etc. But how often will you do this after installation? Hopefully the next generation will be modified for this problem. Another problem is trying to remove the red plastic cover from the adhesive pads. This is almost impossible with nails. I suggest using an edge knife. Place the blade just below the red cap and press down on the foam adhesive pad to break the seal between them. You want it. Place the PostIt underneath and mark the center t on the back of the TV. Make sure PostIt is level. Then, 1 inch to the left of the center dot, vertically attach another PostIt sticker to mark the left edge of the bracket. Make sure it's vertical. Practice placing the brackets as indicated on the PostIt stickers. Remove the adhesive film and carefully align the bracket with the PostIts. Check out the picture I posted in this review. You only have one chance, so be very careful. Also, follow the instructions. They contain very useful and important information. Hope that helps. Overall I am very impressed with the product. A simple idea with good adjustment possibilities. Purchase recommendation despite front lip problem.