Review on 💻 InWin 301 Black Tempered Glass Premium Micro-ATX/Mini-ITX Gaming Computer Case by Ian Iknokinok

I bought this case knowing it would be a challenge to put it together due to the unorthodox component placement but after looking at it it really isn't difficult to do work with the exception of the data cables for two 2.5" SSDs, which must be connected before installing the power supply unit, so that there is enough space for a comfortable cable connection. There is enough space in the motherboard tray, and it has a cutout in the Roof for the CPU power connector but it's not very convenient to let the cables through depending on your motherboard's heatsinks and it looks weird and it should be done better as in my case I had to break off all the tabs to get all the cables to fit the ones I had (1 8-pin, 3 SATA, front connectors and two fans.) Be prepared to have one Having air intake on the underside isn't the usual route, but it's by far the best air intake you'll have as the front space is unfiltered and the cables from the PSU and front panel take up most of the airflow space. . If you don't have skinny fans on the bottom of the case, block the last expansion slot, which isn't really a problem considering your motherboard has a 16x slot in the first two slots of the case, or if you have one 3 slot graphics card which is enough as the space inside is actually pretty decent for long cards. Overall the build quality is excellent and the looks are amazing, especially with the tinted windows giving your system a very sleek look that looks like a large desk element with the addition of some RGB fans or lights.