Computer case Deepcool Matrexx 55 MESH black Review

If you put 120 fans in front, they will be shifted beyond the front panel frame. It turned out exactly to put it on two bolts by sliding it all the way to the left. The lower one rests on one. Because of the basket for disks on 2, it was not possible to fasten. Take 140 for the front.

I've been using it for a while now, and the casing seems quite sturdy. I got it with the front lining included. Despite how it may sound, this did not have a significant impact on the weather. For my money (at room temperature), this is the best case available.

After months of use, I can attest to the case's durability. I got it with the front lining included. Despite how it may sound, this did not have a significant impact on the weather. At room temperature, in my opinion, the case is the best available.

After months of use, I can attest to the case's durability. The front was lined when I purchased it. Despite how it may sound, this did not have a significant impact on the weather. At room temperature, in my opinion, the case is the best available.

I've had it for a few months, and during that time I've noticed that the case is quite sturdy. I purchased it with the lining starting at the front. However, despite how it may sound, this did not have a significant impact on the temperatures. For my money, the case is the best option when temperatures are average.

After months of use, I can attest to the case's durability. The front was lined when I purchased it. Nonetheless, despite appearances to the contrary, this had little to no actual impact on the weather. At room temperature, in my opinion, the case is the best available.

Since I've been using it for a while, I can say that the casing is extremely sturdy. I purchased it lined in the front. Despite how it seems, this had little impact on temperatures. The case is excellent value for the money (at normal temps).

After months of use, I can attest to the case's durability. The front was lined when I purchased it. Despite how it may sound, this did not have a significant impact on the weather. For my money (at room temperature), this is the best case available.

You can put on the front panel of the cooler and 120 mm, but they will be shifted to the right. Not feng shui. The best for your money.

I changed Zalman AI 3 for this case, after Zalman I feel that this is a real case) installed high-speed valves and does not swing like a zalman

For its price - good and very good. The facade is completely mesh, you can organize a normal air flow. Lots of space. The glass fell once and didn't break. At the top, the mesh is attached with a magnet.

I have been using it for several months and the case is quite solid . I bought it lined from the front . but this did not greatly affect the temperatures (no matter how it sounds. With normal temperatures) the case is top for my money

My first case cost more than 3k, and it fully paid for itself. There used to be smaller cases and you always had to look for compromises in PC assembly With its pros: Design, dust filters, excellent ventilation, many slots for turntables, even large video cards will fit With its cons: It’s hard to call it a disadvantage, but you can’t completely remove the front panel for cleaning if you don’t want to tear off the wires) It would be ideal if you could adjust the color of the glow of the power…

- a little farm and go. - incomprehensible mounting sockets on the rear panel, only the 120th screw fits in width, but gaps are made for the 140th in height Different pros: - blown - Lots of cable holes on the side panel to hide most of the wires Cons: - Sometimes the power button "sinks" (it does not affect the work in any way), you need to sharpen the edges of the button or socket - A small bay for the PSU (why did they make it separately at all? ) Large power supplies may not fit in - I had…

A Ryzen 9 3900X processor from AMD. BIOS: GIGABYTE X570 AORUS PRO Motherboard The more stylish option is: SHUT UP! RAM: G. Skill RipJaws V 2x16GB DARKROCK PRO 4 MSI RTX 2060 SUPER GAMING X Video Card. The DEEPCOOL MATREXX 55 MESH body. Samsung 860 QVO 1TB and 970 EVO PLUS 250GB SSDs Be quiet, fans! Total Wingspan: 240 (120 + 140)mm Discounted rate. This is a decent alternative for individuals who do not absolutely require a costly case with LGBT illumination.

What I expected from the body, I got it. There are no plastic clamps in the kit, but there are holes for their fasteners. Everything suits me. Pros below: Everything that was planned to be stuffed into it fit in without much stress. And there is room for larger parts. Got cons: Poor quality screws included. Not everyone wanted to take their place. I had to increase the screw holes for the right extreme attachment points of the ATX motherboard.

Simple but effective if you care about internal cooling. boards and memories as fans whir and radiators mat. They could get by without dropsy just well in this room. Lots much room! Simply said, it's a good case for the money. Use Expertise: The structure is sturdy, with an average steel thickness of 0.6 mm, but the cover does not shake or flex. Hdds will be grateful for the improved ventilation, and you can install up to six fans, however the bottom one serves little purpose because it blasts…

The front fans' questionable fastening. Due to the thinness of the metal, the rail to which they are attached flexes. The front panel of this case only needs to be modified in order to add a strip with a removable grille plug under the 5.5 slot. Therefore, you must decide between this scenario and one with an unconditional 5.5. With advantages: Excellent blowing done solely for show quality given the pricing. has certain drawbacks This holds true for all contemporary cases that cost less than…

The factors I used to determine to alter the body were: 1) mesh on the front side; 2) roomy; and 3) dust filters. Due to the appearance and lack of admirers, this case was chosen. I installed two Cougar 140 coolers on the ceiling and three Cougar 120 coolers in front. I have two cats, and one of them especially enjoys spinning when I'm on the computer. The front side of the wool is opaque and may be removed by hand. It is simply created outside the casing. You may see the photo that I took…

My new body must meet the following requirements: 1) have mesh on the front; 2) be spacious; and 3) have dust filters. This case was picked because of its outward appeal and relative lack of support from the public. I arranged three 120-liter Cougar coolers in the foreground and two 140-liter models in the upper corners. One of my two cats, in particular, likes to spin around when I'm working. The wool is produced outside the case so that the front side does not let light through; it can be…