Review on SharkBite 22630LF 2 Inch Residential Arrestor by Todd Fernandez

Pricey, but if you can't or don't want to learn to solder, the SharkBite attachment system is surprisingly good. I had a severe water hammer from an outside faucet. Water hammer affects the pipes a lot and I was a little dubious that this system would work in a system that hammers. But I unsoldered the pipe at the existing 90 and cleaned the pipe ends. I put the SharkBite hardware on along with the shock and it was waterproof right away. I had my wife on the jet causing the shock and we worked the armature and shock as hard as we could without stressing the machine. I also bought a deburring tool (https://www.amazon.com/gp/product/B000K6QFSU/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1) to help you set the pipe to the correct depth in SharkBite. but to be honest just stick it all the way in so I don't really know if this tool is needed and for $10 I don't think it's worth it. Also, this tool is not a deburring tool, just a gauge to give you the correct depth. However, I recommend disabling the clip. I tested the TEE once and without that release clip it would be a lot harder to take apart for installation and for $3 it would be worth it. https://www.amazon.com/gp/product/B000FPDFBQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1