Review on Thermaltake Perforated Computer with Pre-Installed CA-1G6-00S1WN-A0 for Enhanced SEO by Robert Hines

This is a THIN case! Watch out for the gap, especially when you're water-cooling! Definitely more space for custom water cooling with an ITX board. I'm sorry ATX manufacturers use this case to build a similar setup. With a GPU installed, there is no room to use the additional PCIe slots built into the ATX board. The stock fans were too thick to fit on a top-mount heatsink, so a 15mm fan had to be used instead. The top cooler is an ultra-thin 20.5mm cooler with a 15mm fan and NO empty space! The bottom cooler is a 35.5mm low profile fan with 2 x 15mm fans and a 20mm spare. The location of the port is also important. Some heatsinks place the threaded connectors closer together, which interferes with a full-size graphics card when plugged in from the top. Look for connectors that are further apart or closer to the outside edges when choosing a heatsink for this case. XSPC has several reasonable options. Fair warning: Be careful with the metal components you choose for water cooling. Mixing dissimilar metals such as aluminum heat sinks with copper water blocks will cause galvanic corrosion! This will destroy your cooling system and eventually lead to clogs or worse LEAKS! Assembly was like building a ship in a bottle. Considering the price, I won't complain about the total lack of cable management. Overall I'm very happy with the result of this build! BAU: MSI B450I Gaming Plus ACCPU: AMD Ryzen 7 3700x 4.4 GHz (8c/16t) OC @ +200MHzRAM: 16GB (2x8GB) T-Force Dark Pro 3200MHz CL14 OC @ +400MHz CL16GPU: GTX 1080 Founders Edition OC @ + 200MHz (core) and +200MHz (memory) OS memory: 2 TB M.2 Samsung 970 Evo plus (3500 Mbit/s read) Media memory: 2 x 8 TB (RAID 0) Seagate Exos 7200 rpm/min (400 Mbit /s read) Resolution/pump: Freezemod 800 ml/h CPU block: copper/stainless steel - Freezemod. Max Temperature (72.5°C) GPU Block: Copper/Brass - Cryographic by Aquacomputer. Maximum temperature (48°C) Heatsinks: Copper - XSPC TX120 and EX240 (series) Fans: 3 x Rosewill 15mm slim fans Connectors: Brass - Alphacool 2 x 45, 6 x 90, 8 x 180, 1 Y-connector, 1 Bulkhead/fill port, 1 pressure relief and 1 drain plug, 3m Alphacool 10/13mm transparent flexible hose Power supply: EVGA 550W SFX (fully modular)