Review on Computer case Deepcool Matrexx 55 MESH black by Wiktor Sakowski ᠌

As a picky user spoiled by good cases, I will describe in detail what I didn’t really like about it. Sometimes there is a marriage. On a flat table, check its geometric shape for the possibility of deformation during its transportation. Joints of planes for the presence of cracks. The mounting pads for the motherboard are screwed in very tightly. As many have already mentioned, one fastener in the kit is not enough. In other holes, the cut thread is also far from ideal. With great effort, the rear plugs for expansion cards break off. With their buildup for breaking out (and they break out into the inside of the case) - you can safely damage some elements on the mother. Because of this danger, I changed the algorithm for collecting computers in this case. First, I try on the motherboard without screwing it on, then I outline the plugs that need to be dismantled, I remove the motherboard itself from sin, and then I break them out. The retractable bar near these plugs is also not perfect in design. No indication of activity of Hdd-Sdd disks! In the dark, the front USB ports have to be found by touch! Very narrow cable entry holes for 2.5 SATA SSD drives. If the power supply has rigid power cables, it will not be easy to connect them. It's easier to connect the wires first, and then screw the drives themselves. Not a very long niche for placing a power supply with a large bundle of wires. So much the worse if the "box" of the block turns out to be non-standard, for example, longer. If it were possible to dismantle or temporarily remove the HDD basket, it would be much easier. But the basket is on fixed rivets. And what prevented you from moving the basket a little further from the feeder? It is better to dismantle the lower dust filter for the power supply immediately, it clogs very quickly, and few people clean it often enough. Single color blue power button. It would be more logical to make it at least neutral, with a white backlight. The illumination of the fans under the mesh at the place of its fold on the right side does not look very harmonious.