Review on 🔑 Convenient 2 Pack Keyless2Go Replacement for CWTWB1U331 Keyless Entry Remote Car Key Fobs - Self-Programming Option by Curtis Nice

Works great. Programmed both at the same time. Remember that you will also need to reprogram your original remote as programming reprograms it (and vice versa). The exact method of programming the remotes should be in your owner's manual (in my case indexed under "locks"). Here is the method I used to program both and the original remote for a car (Ford): 0. Unlock the car with the original remote! 1. Remove the original remote from the keychain (make sure you can identify it) 2. Place all three remotes on the passenger seat.3. Insert the key and turn it to the right until the indicators on the instrument panel illuminate. 4. Turn the key one click to the left, just enough to turn off the gauges on the instrument panel5. Repeat steps 3 and 4 8 times or until you hear the locks move - the lights on the dash should be on for the next step. 6. Press a button on each remote control. Castles must move for each of them. You have 20 seconds to complete this step7. Turn the key left one click to turn off the dashboard.8. Wait 20 seconds - you should hear the locks moving again.9. Turn off and remove the key and check the remotes. If you only need two remote controls for the car, the process is the same - just do not press any buttons on the third remote control.