Engine runs great! Assembly is your problem? The old motor must slide out! If it doesn't, you'll have to push them out or use a center punch to knock out the old motor shaft. If you have to knock it out/squeeze it out, the bushing's inner and outer shields are damaged and are holding the shaft. . (See screenshot) Use a small screwdriver to remove only the socket cover, then clean the brass socket and put some grease on it. (I used an anti-seize compound) Assemble and everything should work perfectly! Remember that it needs to be lubricated regularly, and more often as you drive through automatic car washes! If you have the motor installed and it runs slowly or won't break in, follow the steps above π
4WD ORCISH Recovery Traction Boards Tracks Tire Ladder For Sand Snow Mud - Set Of 2 (2Nd Gen Bag + Mounting Pins, Black)
39 Review
Nokian Tires Hakka Green 3 205/55 R16 94H summer
37 Review
SuperJump Trampoline with SuperJump 8ft (244 cm) net and ladder
29 Review
Cordiant Road Runner 195/65 R15 91H summer
24 Review