Review on Enhance Your EZGO TXT Golf Cart with AW Halogen Headlight & LED Taillight Kit for Outdoor Sports Safety & Style by Pavel Craig

They didn't fit my EZGO car. The taillights didn't fit at all - I just attached them to the rear seat rails. The front end has some work to do. One of the front lights only lasted a week. I've decided while I'm swapping it out I'm going to switch it to LED (see old and new bulbs in the pictures). THE GREATEST PLEASURE has begun! Running light, not a headlight. So after trying 2 sets of LED bulbs, both of which were too big for the hole, I decided to use a dremel and enlarge the hole for the larger bulb. I carefully and methodically enlarged the hole until the LED fit. Then, using a smaller Dremel nozzle, I enlarged the slots on the tabs to fit the larger bulb. I checked and the height was ok. I checked the LED on the wiring harness. Wow what a difference. New cool white bulbs and 10 times brighter. And as a bonus, they only draw about 8 watts – the FIFTH of the original! And since there are 2 of them, the difference is 80 - 15 = 65W less power. With an electric kart, this is a very attractive change. I used ATMOMO WHITE H8 H11 33-SMD LED Xenon headlight bulbs - less than $20 a pair. Make sure to order WHITE if you go for these - they come in about 8 colors. So, NOW, instead of the original high wattage, weak, brittle OEM bulbs, I have these rugged, super bright, low watt bulbs. If you are not comfortable with your Dremel or are impatient, you may not want to bother with this adjustment. One wrong move and you can ruin the entire front end. It will take time to fit JUST enough for the lamp but not too big or the o-rings may not work properly. In the last photo you can see one of the holes in the original and one after resizing. You can see the outline of the LED bulb I drew as a guide. GL!