Review on 🌬️ Smoke Ultra Breeze Vent Cover by Fan-Tastic Vent UB1500SM by Bohyun Hansen

We have a 2019 Keystone Cougar 40ft fifth wheel that came with a Dometic Heavy Duty fan in the kitchen. We needed a cover to keep the fan running during rainy seasons because normally the Dometic rain sensor would close the fan cover at the slightest hint of moisture. This cover slides easily over the vent cover and the included hardware simply screws into the fan flange. If you didn't see it in the description, attach this vent cover to your existing fan by peeling some of the overlap gasket from the existing fan flange face and screwing two flat brackets onto each side of the existing fan flange. , then reapply some overlapping sealant. This cover then slides onto the existing fan and attaches to these brackets. The kit includes a mesh panel with approximately 1/2" holes, enough for bird protection, but if you want insect protection you will need to attach a 1/4" or 1/8" gear cloth. " (screen material) and simply use zip ties to secure it to the inside of this cover. The cover itself is very easy to remove, simply remove the four cotter pins that hold it to the brackets and remove it from the Fan.z has unrestricted airflow and I'm pretty sure it's stopped by this vent cap, but that's not a problem as most modern high-flow fans' vent cap is stopped by the resistance of the cap's hinge when they do that Reached the end of its path During a couple of heavy thunderstorms we left the fan running and not once did the rain sensor trip and shut our fan off Money well spent on this cover.