Review on 🚲 Tubeless Tire Inflator 1.15l - Advanced Airshot by Aaron Ward

I've been waiting a year for this review and here it is. Do it without this airshot device. That's exactly what it does, it gives you a blast of air to secure the tire bead to the rim and that air blast does just that very well. It's very rare that I have to inflate it twice to mount a tire and that's just because I didn't properly seat it on the rim before the airshot. Regardless, even if you don't mount it properly and close the air gap, the first flow of air will prime your tire and the second will ensure its fit. I am very happy with this purchase and have tried many different tubeless fits in one pump. This is by far the best I've tried and fits my tires with no issues. Just the other day I started sucking air for the curious about a badly installed rim tape (there was a Stans rim tape). After 8 months it started to leak and I had to glue the rim again. This stans was impossible to remove and clean, please do yourself a favor and don't use stans if you are new to tubeless. It took me 3 hours to remove most of the tape and then I used DT Swiss tape and remounted the tire with this airshot. The longest was removing that Stans tape (unrelated to this review) but I'm very happy and have mounted tubeless tires with no problem. May I recommend? Absolutely 100% A+++++ recommendation. I hope this review helps someone new to tubeless pumps or just looking for a good fitting pump. That he doesn't look any further. Only thing I would say is be careful with the valve. If you break a valve, you're having a bad day. It's not very durable and I don't think it can be replaced. Just be careful when you pump and connect the pump to the valve. Other than that, this is an amazing product.