Review on 🔧 GM Genuine Parts Engine Mount 15854941 - Improved SEO-friendly Product Name by Andrew Griggs

mount came in a box within the box. The heat shield was completely destroyed due to insufficient packing material in the factory box. Make sure you replace what you are replacing. Tools required for frame bolts, 15mm 1/2 drive nut, 1/2 universal drive, 16" 1/2 drive extensions, 1/2 drive ratchet. Tools required for motor bolts, 3/8 drive 15mm, 3/8 -Socket wrench, 1" 3/8 drive extension, but it will be worked on the driver's side, first remove the frame to install the bolts first. Raise the front of the car just enough to slide under, adjust the jack stands in the appropriate places. Install the jack and bottle rack to the back of the oil pan and evenly lift just enough to build pressure. Remove the sensor connector on the side of the cylinder block Remove the 4 engine bolts Raise the engine with a jack just enough to move the support up and towards the rear of the vehicle and out so the engine mount sits on itself against the frame secure bolt Approximate time 1.5 hours s.