Review on 🛁 Modern 2-Tier Tempered Glass Bathroom Shelf - Stylish Wall Mounted Aluminum Design - Silver Sand Sprayed Finish - A4126B by Sally Dickson

Well thought out shelving set to complement my bathroom. Easy assembly and installation. Goes well with my decoration. My only suggestion is to use better quality "anchors" than the ones that come with the shelves when installing them on drywall. I used Blue Hawk cavity wall anchors, see picture. When using them, it's best to pre-drill a hole slightly smaller than the diameter of the anchor before driving them into the wall. It's also a good idea to put some CA on the part of the anchor flange that ends up on the wall so they don't turn when they are first screwed in. Let the super glue dry for about 20 minutes. Firstly, it is better to screw in the anchor bolts by hand rather than with an electric drill to avoid overtightening and damaging them. Be sure to press down firmly on the screw head with the Phillips screwdriver to avoid tearing off the screw head. You will feel the screws tighten into the wall when the anchor is properly seated (don't over tighten). Install the first anchor in the top left corner of the assembled shelves. Then install the assembled shelf using this single screw anchor, align the shelves with a spirit level, and then mark the position of the lower right mounting hole with an awl. Install the second anchor and then secure the shelves with the two anchors installed and mark the location of the other two mounting screw holes. Remove the shelf from the wall and install the last two anchors. Then attach the shelves with all 4 anchor bolts and finally assemble the glass shelves.