Review on CPU cooler Deepcool GAMMAXX 200T, blue by Mateusz Szlassa ᠌

Installed easily! What they write here can damage the motherboard, so it's possible to break anything. It is not necessary to press the cooler on the motherboard to the latch, but while holding the cooler, you need to press the metal pawl of the latch with a screwdriver until it engages with the grip. At the same time, it is not necessary to put pressure on the cooler, just hold it. And that's it! The cooler is really very quiet. I mostly work at the computer in the evenings, and sometimes at night, so I almost don’t hear it, no, I don’t hear it at all. Despite the fact that all the other fans, 3 pcs I have, are very quiet, with rheostats and stand on silicone nails. The i5 3470 is 29-32 degrees idle when the room is 23-25 ​​degrees. while the fan speed is 960-970 rpm. When the load increases, I see that the fan speed increases according to the Speccy program, but I did not notice an increase in noise. Fan speed, which is the maximum seen 1200 rpm. at the same time, the processor temperature dropped from 52 to 38 degrees in less than 5-6 seconds. When I bought it, I thought I would regret not taking the Deepcool GAMMAXX 300, the difference is 500. after all, the 300 still has 4 tubes, and the 200 has -2, but no, and the 200 is quite enough. True, I don’t play in a toy, mostly Photoshop, TechnoCAD, Inventor Fusion, but they also load the processor with large volumes, be healthy! Based on my own experience, I can say that if you are dealing with office and application programs, then feel free to take this cooler. And if, as they say here, "heavy" toys are driven, then I don’t know, I won’t lie.