Review on 🔌 Enhanced Performance: Tekonsha 118578 T-One Connector Assembly with Upgraded Circuit Protected ModuLite HD Module by Leo Govindan

I fitted it to a 2020 RAV4, that's the car it was supposed to fit. After installation, I found that the plugs are connected incorrectly. On a standard 4 pin spade connector, pin 1 (white wire) is common, pin 2 (brown wire) is the running and tail lights, pin 3 (yellow wire) is the left turn signal/brake signal, and pin 4 (green wire). wire) is the right turn signal/right brake. In this particular case, the brown wire is the brake lights, the turn signals on both sides, and the green and yellow wires are the tail lights. It is properly connected to the vehicle's wiring harness as it only fits one way. If you connect the correct sides (yellow on the driver's side and green on the passenger's side), everything should work. You can't misconnect the connectors because if it's wrong they just won't fit.