Review on 🌡️ WILLHI WH1436H 110V Digital Air Humidity Controller with LCD Display and High Accuracy Sensor - 118'' Power Cable Included. Humidification and Dehumidification Modes + Extra Sensor by Tai Waldbillig

I use it in an application where the humidity needs to be 95% and above and a fogger is connected to this unit. Unfortunately, there is no way to turn off the high humidity alarm, and this device regularly displays 100% humidity. There are two humidity alarms, AH and AL (presumably High Alarm and Low Alarm) that cannot be disabled; They can only be set between 0 and 100. Since it's best for my application to be 95% or higher, this device will be alarming all the time. Turning the smoker on at 94% will almost certainly add enough smoke to bring the level back up to 100%, even after the smoker is turned off at 95%. This problem has no solution. I had to settle for lower settings, around 90%, to keep the level from rising. Instead my range is regularly around 88-100 (the alarm still goes off and everything has to be adjusted regularly based on fresh air and outside humidity to prevent that). It's better than nothing, but I'll look for another device for the job or try unsoldering any speakers connected in the device. If you want to solve this problem, the easiest thing seems to be for the company that makes this to set the AH to a range that goes up to 101. It can then be switched off. This is probably less work than adding another option that controls whether the AH setting is toggled on or off.