Review on 💻 ROSEWILL CHALLENGER S ATX Mid Tower Gaming Computer Case with Blue LED, 3 Pre-Installed Case Fans, and Front I/O Access Ports for Desktop PC by Mark Vazquez

Neat case. If you are looking for a cheap case, this is a good option. I bought it on the Revain Marketplace for $30. I wouldn't pay more than 35€. Pros: (Not all included) 3 fans included (all 3 have 3-pin headers, two also have Molex) Decent airflow Mesh air filter Motherboard standoffs already installed Side window Cons: It says you can mount two fans on top, one has ZERO exhaust space, it is completely closed. The hard drive cage has rivets to hold it in place, it is not easy to remove and requires a drill. The CPU cable must be routed through the cut-out BEFORE installing the motherboard, otherwise the connector will not fit. Through-hole cable routing area is narrow, even with a protruding rear wall, had to work. Make sure your cables are as straight as possible. Information. In push-pull mode, you cannot install a radiator at the back or at the top. You can have a push and a push/pull. Having 240mm at the top would be impractical as there should be 120mm of free space at the exit. I don't think a 240 in the front will do, but I haven't tried it.