6 modern cores and 12 threads per top ten is just an excellent indicator. The stone itself will never boost on all cores up to 4.2 Hz, no matter what you do. If you set the knobs to 4.2 Hz for all cores with the selection of the optimal voltage, then the performance increase will be a ridiculous 7% and the temperature will rise significantly. By default, auto overclocking was enabled on my mother, and as it turned out, it works best, 3.9 Hz for all cores and 4.2 Hz for two, three cores. By itself, the temperature constantly jumps in idle time from 30 to 40 ° C, in a load it does not rise above 70. Because of these jumps, you need to adjust the operation of the processor fan so that you don’t go crazy. The RAM requires careful selection of timings and not only primary ones, and only after that the pebble is revealed. All of the above is not a shortcoming of the stone, but only specific features. If you are not ready to set up and experiment with the selection of parameters, take Intel twice as expensive, and even with snot under the lid instead of solder =)
Deepcool GAMMAXX 300 CPU cooler, silver/black/blue
166 Review
Seagate Barracuda 1TB HDD ST1000DM003
93 Review
🔋 Power Up Your Gaming Rig with AMD Ryzen 5 2600 Processor with Wraith Stealth Cooler - YD2600BBAFBOX
116 Review
🌬️ Silent Cooling Power: Dark Rock Pro 4 CPU Cooler with 250W TDP, BK022
134 Review
🔧 Premium Repair Replacement Screws & Tools for MacBook Pro Retina 15"/13" - Complete Bottom Case Set
10 Review
36-Pack Black Rubber PC CPU/Case Fan Screws/Rivets Set for Computer
11 Review
M.2 Screw Kit: Easy Mounting for NVMe SSDs on ASUS Motherboards
19 Review
🖥️ Helifouner 450-Piece Computer Standoffs Spacer Screws Kit: Ideal for Hard Drive, Motherboard, Fan, Power Graphics & Computer Cases
10 Review