I took another reviewer's advice and attached a 1/2 inch PVC pipe and T-handle to the new unit. Removed the old one with the crowbar, using the same 1/2" T-handle. Please note that the unit does NOT have to be absolutely straight when fitted. In fact, it's slightly curved, perhaps on purpose, which is why you really want that T-handle need to twist, wiggle and push the unit when installed in a pipe. Not difficult, just insert into the pipe with some agitation and twist. Fits straight, falls to the inside edge of the 4" pipe. The unit has a pad on the bottom that can be cut off if it doesn't fit in the tube (hover and stand up) I would be careful when trimming it (again if you're doing a T-handle as another reviewer pointed out). has it EASY to install with small twists and probably makes removal just as easy.Agreed the unit needs to be checked or cleaned regularly say every six months or so two units now and after flushing mi I use a pressure washer to clean with a hose. As for the unit itself, it was delivered quickly and is an exact replacement for the unit that was in the tank. Highly recommended - well worth the price.
NANPU Air Drying System With Double Filters And Pressure Regulator Combo For Clean And Controlled Air Supply
18 Review
NANPU 1/2" NPT Air Drying System - 5 Micron Particulate Filter, 0.01 Micron Coalescing Filter, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl W/Metal Gauge
23 Review
NANPU 1 FRL Air Filter Regulator Lubricator Combo With 0-150 Psi Gauge, 5 Micron Brass Element, Poly Bowl & Semi-Auto Drain - Metal Bracket Included
20 Review
NANPU 3/8" NPT Compressed Air Filter Regulator Combo Piggyback, 5 Micron Brass Element, Poly Bowl, Semi-Auto Drain, Metal Bracket, 0-150 Psi Gauge
26 Review