Review on 🚗 U.S. RubberShox DuraTPE Series Automotive Front-Rear Coil Spring Buffer Cushion/ Suspension Shock Absorber Retainer Performance Booster Kit Universal Type A-F CSB Plus, A by Chris Smotherman

as recommended, I did a lot of video reviews and measurements before buying. Therefore, the installation was easier than expected. A few tips that have worked for me. Be sure to lubricate the springs and spacers. Then, while I held the bottom of the gasket on the spool, my wife pressed the top into place with the straight end of a 4 foot pry bar. As I moved along the spacer, I took an 8" screwdriver, stuck it through two slots in the rubber (these slots will be used later to insert plastic cable ties), grabbed both ends of the screwdriver, and then twisted the spacer so we have always worked on an open, easily accessible side of the spring. When the spacer was fully installed, I took my trusty screwdriver and unscrewed the spacer back to exactly where I wanted it on the spool. Accessed the second and then able Being strategic to adjust both when fully seated made the screwdriver trick the key to my success.