Review on Innocn 13.3-Inch Portable USB-C OLED Monitor - Editing Friendly with 60Hz and 1MS Refresh Rate for Mac and PC - Model 13K1F by Garrett Walton

This display is amazing. The picture quality is top notch, and the exterior build quality is also top notch. It was easily recognized by both the old rPi and the Intel Compute Board. Both boards recognized it as a 1920x1080 60Hz display. Some notes; if you use: HDMI + USB top = 20% maximum brightness HDMI + USB bottom = 100% maximum brightness USB top only = 20% maximum brightness USB top + USB bottom = 100% maximum brightness. So as long as the bottom USB port is plugged in, you'll get 100% maximum brightness, whether you're using HDMI or USB-C as the video input. If the lower USB is not connected, you will only get 20% of the maximum brightness. If you want to use this as a 1 cable setup you will only get 20% of the maximum brightness. I personally use this at 60% brightness. I use it in a not very bright room. I'll update this review with information on custom resolutions and higher refresh rates. Here's what I got: 960 x 540 75Hz, 1280 x 720 75Hz, 1920 x 1080 70Hz. The lower updates I've tried have always worked. For the resolutions above, I've also tried 5Hz higher than specified and it didn't work for me. So no crazy overclocking, but something!