Review on 🔒 High-Quality 10mm Flat Shaft Central Door Lock Actuator Motor FC-280PC-22125: Ideal for Power Locking Repair Engine with D Spindle by Greg Hammett

I can confirm that this FC-280PC-22125 FLAT SHAFT, D Spindle Door Lock Actuator Motor is exactly fit to replace the motor in 2014 Toyota Driver's Door Actuator. equal to 4 LE. The actuator in this car is different from the disassembly information I was able to find online, but it fits perfectly. If you're planning on converting a 2014 Rav4 yourself, first ask yourself if you're good at opening ABS clamshell cases without breaking the square, profiled clips that close them. If the answer is no, you should just buy the entire drive. To make it easier to disassemble the bed, be sure to pry the clip along its entire length, not just its other end. There are a lot of these in this build so you can use toothpicks to hold open clips which you pry just enough to open. After watching all the videos I could find related to this repair, the whole process took 2 hours, but I'm probably more mechanically inclined than most. You do not need a special fairing removal kit for a 2014 rav4. A plastic ice scraper to pry out the control panel and guitar picks to loosen the center door panel was all I needed to remove this section of door panel. something none of the videos seem to be telling you: don't just peel the vapor barrier off the inside of the door. If you want the vapor barrier to stay in place without stretching, use a utility knife to gently separate the black adhesive while peeling away the vapor barrier. On a 4 year old car the glue is likely to be pliable and towards the end of the repair the bond will be restored by rubbing the glue back in.