Review on 🚦 High-Quality Standard Motor Products SLS247T Stoplight Switch: Ensuring Reliable Brake Light Functionality by Osoulo Sharp

Installation guides are helpful but they're not always accurate so I always check my part to make sure what I'm ordering looks the same, but it seems like some reviewers haven't , so this product gets a call for something that doesn't fit. The 2-pin looks very different from this one, so grab a flashlight, stick it under the dash and take a look, because 1 star for mismatch can be avoided. On my 1999 Expedition I had a hard time getting out of the park on the first launch on a very cold morning (no problem later in the day) so either this part was relatively easy to replace or the shift lock actuator wearing. to get and involves lowering the steering column. Sooner or later the car would warm up and I would get out of the park, but I didn't want to wait for that to happen. The recommended simple test was to step on the brakes in a dark garage to see if the brake lights came on and they came on. So in my case it wasn't a reliable test as the problem was resolved after the replacement There is still an immediate lag. . On my car, you can bypass the park mode lock by turning the key one click toward On (dash off or you've driven too far), then shifting into neutral and starting. Now I've had it with this car and it has to go because Ford has ignored all known problems and electronics that could interfere with what you want to do. If you have an expedition my age, you might know the problem with the door; burnt out spark plug directly from the cylinder; cold-solder the odometer, which makes it partially work; hard cold start with fuel pump; and in general an impossible engine to work with at least a little easily. Definitely check which switch you need first and this one fitted well and solved the problem and for about $11 I have no complaints and although my brake lights did come on it was the path of least resistance and I am glad i tried it first. I bought my parts at this big auction to save a few bucks but after a few setbacks I gave up the idea and have had good success with Standard Motor products purchased from this site due to their suitability and functionality... plus a hassle-free return policy.