Review on 🔊 WALI Sound Bar Mount Bracket with Adjustable Extension Arm: Perfect for TVs 23-65 Inches, up to 33 Lb! by Abdullah Huan

I really wanted this to work because the TV manufacturers don't see the value for the customer in offering quality audio when they buy it and I wanted my soundbar to blend with my TV turns. It was installed on a kitchen/dining room TV on an arm mount on a Vizio 32 inch Sam's D-Series TV with a Bose Solo 5 from Walmart. The speaker is light enough that I was able to mount the brackets without taking everything with me. below and didn't need the smaller arms included for different angles. Washer from the outside through the square hole on one end of the lever. Then I loosened the top left screw of the TV mounting plate. Using a small plastic washer on the inside of the bracket and a larger washer between the screw head and the bracket (yellow and red circles above in the 2nd picture), I loosely attached the left bracket to the TV. Then I did the same on the right side. I then centered the speaker on the TV and tightened all 4 screws. It may have slipped over time but there is a way to mount it directly into additional holes in the mounting plate where I could use a lock washer to prevent this. If that happens, I might have to do it. The schematic is very flexible, so I find it useful in many situations. Installation took no more than 20 minutes and it works great for me. Using a small plastic washer on the inside of the bracket and a larger washer between the screw head and the bracket (yellow and red circles above in the 2nd picture), I loosely attached the left bracket to the TV. Then I did the same on the right side. I then centered the speaker on the TV and tightened all 4 screws. It may have slipped over time but there is a way to mount it directly into additional holes in the mounting plate where I could use a lock washer to prevent this. If that happens, I might have to do it. The schematic is very flexible, so I find it useful in many situations. Installation took no more than 20 minutes and it works great for me. Using a small plastic washer on the inside of the bracket and a larger washer between the screw head and the bracket (yellow and red circles above in the 2nd picture), I loosely attached the left bracket to the TV. Then I did the same on the right side. I then centered the speaker on the TV and tightened all 4 screws. It may have slipped over time but there is a way to mount it directly into additional holes in the mounting plate where I could use a lock washer to prevent this. If that happens, I might have to do it. The schematic is very flexible, so I find it useful in many situations. Installation took no more than 20 minutes and it works great for me. I loosely fastened my left hand to the television. Then I did the same on the right side. I then centered the speaker on the TV and tightened all 4 screws. It may have slipped over time but there is a way to mount it directly into additional holes in the mounting plate where I could use a lock washer to prevent this. If that happens, I might have to do it. The schematic is very flexible, so I find it useful in many situations. Installation took no more than 20 minutes and it works great for me. I loosely fastened my left hand to the television. Then I did the same on the right side. I then centered the speaker on the TV and tightened all 4 screws. It may have slipped over time but there is a way to mount it directly into additional holes in the mounting plate where I could use a lock washer to prevent this. If that happens, I might have to do it. The schematic is very flexible, so I find it useful in many situations. Installation took no more than 20 minutes and it works great for me.