Review on KONIGEEHRE Cupboard Stainless Concealed Mounting by Vangele Carson

Seller did not respond when asked what size rosette means it is a 'full rosette'. I ordered them anyway, and after testing the hinge with a 3/4" piece of wood representing the style, I found that the hinges had an approximate nominal 5/8" overlap when the 1 /8 inch clearance from the edge was used to cut the door into the hinge cup. The lateral adjustment range is approx. 1/8" and the distance from the cabinet front to the door is also approx. 1/8". Total vertical adjustment range is approximately 1/8 inch. One thing I noticed is that the minimum clearance between the closet and the door is 1/8 inch which seems a little big but I can deal with that as these are closets for my garage. The opening angle is about 90 degrees, which is less than I'd like, but again not a problem as I have adjacent doors and this keeps them from banging together when both are open. The soft-close mechanism seems to work well, although I haven't had enough time to determine its longevity.