Review on SMALLFATW Front and Rear Aluminum Inner Fender Liner Set Compatible with Jeep Wrangler JK JKU, US Flag Pattern, Great Fit & Easy Installation, JK Accessories, Black 4PCS by Marc Burke

Arrived a day early which was great. I got the parts straight away. It's very easy. Use small screws to connect the three pieces on each side. All holes line up unless you tighten all the nuts and bolts at the same time. You can then attach the rubber strip. Inserting the earbuds was pretty easy. The driver's side was a great fit. Use the 4 longer screws to attach the fender liner to the wheel arch. Using a small wrench and strap, secure the nut to the rear of the wheel well, then use a socket wrench to tighten the bolt from the front. It's just two nuts and bolts on the bottom two holes of each bushing and wheel well. The top part goes in and is held by the edge of the wheel arch (very tight). It is impossible to pull it out after the installation is complete. The passenger side was the same, but I had to use my own weight to push the fender in and up into the wheel well. (My height is 6ft 2,195lbs). Don't bother with nuts and drilling unless you really like the extra work. Not worth it in my opinion. I'd do it if needed, but I tried the easy way first and it's very solid and smooth. I like the look of the earbuds. They are strong and quite fat. The flags look great and are meant to be mirrored. The US military uniform features the US flag worn facing backwards. As a rule, the blue starfield must always be in the highest honor position on the uniform. This position has always been the right shoulder, with the flag's blue stars facing forward. So don't order this and leave a bad review because you wanted two flags with stars in the top left corner.