Review on 💪 Effortless Installation: Patelai 3 Sets (12 Pieces) Spring Loaded Mirror Hanger Clips with Mounting Tools Included by Shantel Griffin

These clips screw to the wall, all fasteners are included. Half of the clips are spring loaded, the other half are not. Place the spring loaded ones on top. The easiest way is to first position the clips in the picture, tape them to the front and then tape the assembly to the wall with strong double sided tape. Carefully remove the painting, leaving the brackets on the wall. Next, drill a pilot hole for the screws. Remove the clamps and use a masonry bit to drill through the drywall and insert the plastic anchors. (If you're standing on a stud, just screw it in without removing the clips from the wall.) Tap the plastic anchors flush with a mallet or mallet. Then use the supplied screws to attach the clamps. reattach image. Each clip has a cork washer to prevent the image from slipping. The reason you need the spring clips at the top is so you can insert the picture into the bottom clips first and then lift the top tabs and insert the picture. The weight of the picture can compress the springs, allowing your picture to fall when the springs are down. Holds 7mm thickness or about 1/4 inch. I used 1.5mm plexiglass because it doesn't break like glass and you won't cut yourself on the edges. The clips are almost invisible from the front. The most elaborate clips I have ever found, no visible screws on the surface like those old fashioned clear plastic clips, plus they are chrome steel, much, much stronger.