Review on 🖨️ BING 3D Printing Filament - 1.75mm PLA for Advanced Additive Manufacturing by Mike Groover

package came with delivery one day., brown standard carton. The vacuum bag was sealed well and the thread has another plastic seal to prevent unraveling, a nice touch. Manufacturer's recommended pressure ratings are printed on the pretty side of the logo and on the front sticker. I will update the print quality after 20 hours of printing. did. Obviously, PLA-F is a blend of PLA ABS. The bank massacre was a learning process. Layer adhesion was poor. After temporary turrets and a few boats, I figured ABS would address his nasty problems. I had to increase the layer temperature to 65°C and this fixed the layer adhesion problem. I then increased the temperature of the nozzle to help the layers adhere better, but the boats broke from the sheer pressure. Then I lowered the fan speed to 50%... PERFECT. So, for those who want to try this PLA-F, here are my settings: nozzle 230-240°, bed 65-70°, fan speed 50-60%, print speed 50mm.