Header banner
Revain logoHome Page
high-quality melca black pla 3d printer filament, 1kg spool, 1.75mm diameter with precise tolerance logo

High-Quality Melca Black PLA 3D Printer Filament, 1Kg Spool, 1.75Mm Diameter With Precise Tolerance Review

30

·

Very good

Revainrating 4 out of 5  
Rating 
4.0
🖨️ 3D Printing Supplies, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to High-Quality Melca Black PLA 3D Printer Filament, 1Kg Spool, 1.75Mm Diameter With Precise Tolerance
img 2 attached to High-Quality Melca Black PLA 3D Printer Filament, 1Kg Spool, 1.75Mm Diameter With Precise Tolerance
img 3 attached to High-Quality Melca Black PLA 3D Printer Filament, 1Kg Spool, 1.75Mm Diameter With Precise Tolerance
img 4 attached to High-Quality Melca Black PLA 3D Printer Filament, 1Kg Spool, 1.75Mm Diameter With Precise Tolerance

Photos by authors

(10)
img 5 attached to High-Quality Melca Black PLA 3D Printer Filament, 1Kg Spool, 1.75Mm Diameter With Precise Tolerance
img 6 attached to High-Quality Melca Black PLA 3D Printer Filament, 1Kg Spool, 1.75Mm Diameter With Precise Tolerance
img 7 attached to High-Quality Melca Black PLA 3D Printer Filament, 1Kg Spool, 1.75Mm Diameter With Precise Tolerance
img 8 attached to High-Quality Melca Black PLA 3D Printer Filament, 1Kg Spool, 1.75Mm Diameter With Precise Tolerance

Details

BrandMelca
MaterialPolylactic Acid
Item Weight1000 Grams

Reviews

Global ratings 30
  • 5
    20
  • 4
    2
  • 3
    3
  • 2
    1
  • 1
    4

Type of review

Revainrating 5 out of 5

Love this filament so far (used almost all of it)

Love this filament so far (used almost all of it). This is a real review bought with my own money .This filament worked better than most of the more expensive filaments I have used (even the $20+ filaments). I was skeptical with the price being so low and seeing some of the other reviews. IF you know your machine and how to dial it in then don’t second guess this Purchase based on the negative reviews. I have noticed that most people’s reviews involving 3d printers is user error and not the…

Pros
  • Excellent product and ordering experience. Flawless customer service and great price.
Cons
  • Can produce a significant amount of waste and scrap

Revainrating 2 out of 5

Good for decorative pieces, poor mechanical performance.

I print the same gcode over and over, so I bought a sample spool from here to maybe get some savings in the long run. It comes out just fine, but can't handle simple mechanical loads. Now, obviously that depends on how hard you try and how many perimeters you print, orientation, etc, but let me tell you, a couple dollars less. I wasn't impressed. It came in a sealed bag with it's own atmosphere and a sample filament. I'm not sure what the sample was, because it wasn't marked. Seemed like that…

Pros
  • Decent filament has constant feed for the temperature.
Cons
  • Expensive compared to other filaments on the market

Revainrating 5 out of 5

Excellent value for good filament

Great price for a good amount of PLA. I have only used it with a 3d printer pen, but it works wonderfully. The generous sample of different colors contained in the shipped product was an excellent touch and very much appreciated. I have already recommended this to a friend looking for filament, and I will certainly be buying again.

Pros
  • Works great for my Monoprice maker select plus printer. About to order another spool.
Cons
  • Adhesion issues with certain printer bed surfaces

Revainrating 4 out of 5

Good prints. Great price.

I purchased both black and wood-color and black PLA. I need to tweak the parameters a bit to get the black PLA to print the top layer a bit better. The rest of the print was as good as with other PLA that I have been using. The product was packaged well and not open as indicate by one reviewer. I will be ordering a couple of more colors at this price.

Pros
  • Decent seller, product looks to be pretty good and I will update as soon as I get it tested
Cons
  • Tendency to clog the printer nozzle more frequently

The material itself is good quality and extrudes beautifully when it extrudes. I am, unfortunately, having some issues with that. This filament has just jammed in my hotend for the second time. I was hoping the first time was a fluke since it was near the beginning of the spool, but when I measure the filament, it is 1.8 - 1.9 mm and it's actually getting stuck above the heat break because it's just too big to get through. Also, if this filament was vacuum sealed, they need to switch to a…

Pros
  • Great results, terrible packaging. Would recommend.
Cons
  • Only available in black color

Revainrating 5 out of 5

Fantastic job and very generous!

If I could give more stars I would! Not only did my shipment arrive well before it was supposed to but I received more then I thought!Miss Melody was very kind and added a small ream of blue and red to my order with a thank you note. As the filament is working fantastic for me I will only be ordering from miss Melody from now on and highly recommend her in the future!

Pros
  • 1 kg of pla, quick shipment, gave me a free gift, what else could I want?
Cons
  • Tendency to break or snap during printing

I haven't even tried to print with this stuff yet and already the experience with it is so bad that I will never consider getting this brand of filament again.First, the filament arrive in a completely torn up ziplock type bag bag - every reputable brand arrives in vacuum sealed bags for a reason - in a box that was not even sealed properly and no desiccant. Whether or not the filament was actually damaged by moisture in transit is completely down to luck. Second, and even worse, the spool it…

Pros
  • Great product and also love the personal touch this company has.
Cons
  • Has a tendency to jam in the printer nozzle

Revainrating 5 out of 5

got to get more in my review

great stuff really printing at 210C doing great just not for fine detail printing at .3 mm a layer it does perfect will be using this brand as my main stock for my business

Pros
  • Great filament with consistent predictable prints.
Cons
  • High sensitivity to temperature changes during the printing process

Revainrating 3 out of 5

Too bad too, it looked like it was extruding pretty .

Ordered this filament a while back and am now getting around to printing with it. Unfortunately, with only about 1/5 of the roll used, I've now had two jams caused by out-of-round/oblong filament. In the one case I measured, it was 1.60mm on one axis and 1.97 on the perpendicular. Too bad too, it looked like it was extruding pretty well.I pulled off and discarded a few meters in each case, but not enough I guess as the two jams were pretty close together. Hopefully I'm now past the bad…

Pros
  • Perfect for producing intricate designs
Cons
  • Possible allergic reactions to the filament material

Revainrating 1 out of 5

Worst filament I've used

Worst filament I've used. Constantly clogs the nozzle, even a brand new nozzle was clogged two hours into a print. Constant extrusion problems because of dimensional inconsistencies. Would not recommend buying.

Pros
  • Consistent filament diameter
Cons
  • May require more frequent adjustments to printer settings

First let me say that this review is not about the actual Melca black, which I have purchased and used many times -- and, for the price, has been an excellent filament. The last two rolls of this that I purchased from Revain were supplied by GiODLCE and are NOT Melca black filament, which I am quite familiar with. The packaging is different, the spools are different, the printing temperatures listed are different, etc. Regardless, I figured I would at least try it instead of returning it…

Pros
  • Does not require any special handling or storage
Cons
  • May require more frequent re-calibration of the printer nozzle

Revainrating 5 out of 5

Best so far: my feedback

Great filament! I've used many other brands including Hatchbox and this is, by far, the best I've encountered. Industrial & Scientific.

Pros
  • Industrial & Scientific
Cons
  • May produce more noise or vibration during printing

Revainrating 5 out of 5

Great Filament at an Excellent Price!

This is my first filament purchase from Melca and I'm impressed. The +/- 0.03mm tolerance seems to be met, whenever I check the diameter with my calipers it's within the proper range, most of the time it's within 0.01mm. With the price of these rolls, if this level of quality is kept over the entire roll I will be a customer for a long time. The free samples included with each roll is a nice touch also, it's about 6meters so enough for a pretty decent test print so you can get a feel for their…

Pros
  • Compatible with a wide range of 3D printers
Cons
  • No documentation provided regarding the source or quality of the filament material

Revainrating 5 out of 5

High quality for a great price

Wonderful product that shipped very fast. The quality is just as good as the roll of $30 PLA I have and I haven't had any problems with clogs or adhesion.

Pros
  • It's been running for 22 hours and no problems.
Cons
  • Does not adhere well to certain types of print bed surfaces

Revainrating 5 out of 5

Pleasantly surprised!

A friend and I were discussing a new brand of filament that showed up, We were dubious as to how good it could be considering the price point.I have to say, I'm pleasantly surprised by how it's turning out. I have only printed a couple of Benchies at this point (as is tradition) but I'm loving the quality I'm seeing!Seems to print best in the 180-185 range.Edit: added photos. This was printed on an Anet A8.

Pros
  • Maintains its color even after printing
Cons
  • Lower strength or durability compared to other filaments

Revainrating 5 out of 5

AMAZING Purchase good for me

It's my favorite PLA so far! No bubbles, no curling, no problems. Its a dark, solid black. So far I've used it to print the hilt of a sword and a bookstand. Would highly recommend :D

Pros
  • smooth even color no jams or clogs
Cons
  • Inconsistent quality from purchase to purchase

Revainrating 5 out of 5

Works great for me in my review

I bought this for my tronxy p802m and works great with it. Bed adhesion is never a problem. I have never had a jam. Layers stay together well.

Pros
  • Prints great on my monoprice mini v2 at ext: 220°CBed: 60No hassles no problemsWill buy again
Cons
  • Greater risk of fumes and emissions during printing compared to other filaments

Revainrating 3 out of 5

It is well wound and comes off the real nicely. Color is good

I've used up probably 1.75 pounds of the real. The filament only broke once. There wasn't any snagging, it just got to a brittle point and broke. It is well wound and comes off the real nicely. Color is good. No other problems noted.

Pros
  • Resistant to warping and cracking
Cons
  • Not recommended for children or pets to handle or play with

I was a little hesitant on this filament at first with how cheap it was, but that doesnt show to me. It prints nicely and the black doesnt turn grayish after printing like some filaments.

Pros
  • Meets the highest industry standards for quality and safety
Cons
  • Not a good choice for prototypes or rapid iterations due to the higher cost