Review on 🧴 Outgeek Neoprene Bottle Sleeve 2-Pack - Optimal Water Bottle Holder & Carrier by Zachary Spaulding

The padded neoprene case is well made and the material is thicker than the original case that I have owned for several years. The first two photos show this new case with Klean Kanteen, a 20 oz stainless steel double wall vacuum flask on the left and a 20 oz Yeti Rambler double wall flask on the right in the composite photos shown. The cuff is tight on both bottles, but that's tolerable. I expect the fit will loosen up over time (the manufacturer should consider increasing the diameter by about 1/4 inch from the current one). It's disappointing that the product description claims the case is taller than it actually is. receive. The sleeve is over 1" short as it doesn't end up like a Klean Kanteen bottle should if the length was as advertised. The Yeti bottle is 18 ounces shorter than the 20 ounce Klean Kanteen bottle and this neoprene sleeve runs the full length of the bottle as shown. If the sleeve were about 1 inch longer, it would cover the entire 20 ounce bottle of Klean Kanteen as shown in Fig. 3 with another supplier's sleeve. A comparison of this new sleeve with a neoprene sleeve that is several years old can be seen in the last picture. It should be noted that using the sleeve inside out as shown in the images provides a lighter fit and also closes the walls of the bottle slightly higher, with a smooth fluffy finish on the inside of the sleeve rather than the top outside. surface of the sleeve in the package.