Review on Computer case Fractal Design Node 804 by Stanislaw Plonka ᠌

The mATX enclosure with the most functions. Perfect for high-performance systems that require a cool and quiet environment, such as NAS. 100 terabytes (10 hard disks of 10 terabytes each) with a fan and a fence? Easily! These are some advantages: 1. Outward presentation. 2. The chic design of interiors: - Has two chambers. Cooling of the components is kept separate. - Four 12 mm for blowing and two 12 mm (or a combination of 12 mm and 14 mm) - There is the potential to mount two 280 mm devices. A heatsink with no restrictions on its thickness (depending on the height of the DIMM and the CPU water block) or four 240mm radiators in parallel. — 10X HDD 3.5`\s- 8X HDD 3.5 feet in its own portion with two sets of 12 millimeter airflow. blower fan and a blast hole measuring either 12 or 14 mm. Perfect for use in RAID arrays. - 2X HDD 3.5 feet or 2.5 feet in the CPU part, with airflow coming from the fan located at the bottom of the unit. - Two 2.5-inch hard drives installed in the front cover. - PSU without any limitations on the length. - There is no more room for cable storage. 3. Vibro rubber bands for HDD. 4. Reobas. He is. 5. Dust collectors installed on all fans that have the "hot" installation option. With these drawbacks: 1. 3PIN fans. At low speeds, one of mine makes a crackling sound. 2. Reobas. I would appreciate a twist. The speeds indicated by the toggle switch, 1 and 2, are virtually identical to one another. 3. If you install two video cards, the lower one will be very close to the hard disk drive. Nevertheless, this is only the case if you install them in the primary storage area rather than the cage. 4. A length of 290 millimeters for video cards. ...and other items are installed after the front lower fan is removed.