The parts worked correctly as they were plugged into the same outlet as other low voltage parts. The parts are controlled by Arduino MEGA. Due to the PA on the board, they draw more current than the non-PA parts and are therefore sensitive to the length of the GND, +3.3VDC wires. In my experience, if the wires are longer than 5 inches, the module will work erratically, and if the wires are longer than 8 inches, it will stop working at all. To solve this problem, add/solder a 10uF tantalum capacitor to GND and +3.3VDC as close to the module as possible. as much as possible. My suggestion to Longruner is to add such a capacitor on the module's circuit board.
10GBase-T SFP+ Transceivers, 10G Copper RJ-45 SFP+ CAT.6a, up to 30 meters, π Cisco SFP-10G-T-S Compatible, Ubiquiti UniFi UF-RJ45-10G Supported, Fortinet, Netgear, D-Link, Supermicro (Pack of 2)
9 Review
π‘ CM19A R.F. PC Transceiver for X10 Devices
8 Review
πΆ kuman 10pcs nRF24L01+ 2.4GHz Antenna Wireless Transceiver Module for Arduino Raspberry Pi Compatible K19
8 Review
π Gigabit Ethernet Media Converter, Single Mode Dual SC Fiber, 1000Base-LX to 10/100/1000Base-Tx, up to 20km, 2-Pack
9 Review
π StarTech.com NETRS2321P: 1-Port RS232 to Ethernet IP Converter, Serial over IP Device Server - Black
5 Review
π uni USB C Hub with Ethernet Adapter, 4K HDMI, Gigabit Ethernet, and 3 USB 3.0 Ports for MacBook Pro, iPad Pro, XPS
11 Review
π StarTech.com NETRS232 Serial to IP Ethernet Device Server - DIN Rail Mountable - Serial Device Server - Serial Over IP Device Server (Black)
4 Review
π USR-TCP232-410s: RS232/RS485 Serial to Ethernet Adapter/IP Device Server with DHCP/DNS Support
4 Review