12BL LED strip in blister APEYRON electrics, 12V, 14.4 W/m, smd 5050, 60 d/m, IP65, 5m. RGB Review

The LED strip from the Standard line with the article 12BL operates on direct current with a voltage of 12V. Thanks to smd 5050 LEDs emitting a luminous flux of 700 lm/m*, the tape is an excellent solution for organizing basic lighting and bright decorative lights. It is suitable for creating basic lighting based on multi-level ceilings, and will also be an excellent choice for illuminating retail equipment or advertising signs that require high brightness. Compared to incandescent bulbs, LED strip is equivalent to 70W bulbs. This model of LED strip is multi-color. Each LED of such a tape has 3 basic colors: blue, green and red. Depending on the controller used, you can get up to 256 different shades of glow. When choosing an LED strip, it is important to take into account such a parameter as power consumption in order to choose the right power supply. For this model, this figure is 14.4 W per meter. The degree of protection of this product complies with the IP65 standard, which allows it to be used not only in wet rooms, but also outdoors. You can cut off the LED strip in specially marked places, which are located every 50 mm. The compact dimensions of the LED strip with a width of 10 mm and a base made of a flexible, two-layer, copper substrate give a huge advantage in creating any design fantasies. Advantages: - High-quality San''an LEDs; - Improved cooling thanks to a two-layer copper substrate; - Service life of at least 50,000 hours; - Connectors and wires for connection are already soldered to the LED strip; - Easy installation thanks to high-quality 3M adhesive tape; - Energy saving on compared with traditional light sources; - Comfortable color reproduction due to CRI> 80.