3/4 Inch GHT Garden Hose Quick Connector Set Solid Brass Easy No-Leak Male Female Threaded Value (1 External) EQC-1 Review

I've been trying to find a quick connect that doesn't break down or leak and this is the one. Comes with ample thread tape and extra washers. Highly recommend.

had to buy these after the 'nipple' part to connect a hose to a misting system disappeared. the one in this set worked exactly the same, and the receiving connector went on pressure washer so no longer have to keep removing the ends when moving hose between applications

I haven't had these long enough to know their durability, but they have performed good so far connected tobthe hose bibs allowing the mobile hose reel to easily connect and then be wheeled back in the garage. They were easy to connect to the backflo connectors and have not leaked up to this point. They have been exposed directly to the HOT Texas sun since they were installed. One is on each side of the house so they are in N,S,E,W sun all day. I reccomend these quick connect fittings.

It took three attempts for them to send me the correct thread orientation, but with the right one it worked well. Thanks for attention.

I have been looking for a set of these for a while and have added these to my sprinkler, hose nozzle, power washer, and some hose sections to speed up changing over what equipment I'm using outside. They connect and disconnect very easily, and provide a good seal with no leaks. There was no noticeable reduction in flow to my sprinkler, which is great. I will likely purchase more someday to put a connection between each hose section I have. The brass is nicely machined with no sharp burrs, and…

These replace some plastic and aluminum quick connectors that corroded and became stuck to the faucets and hoses. These are brass so I don't expect the same issue. Also since they have 3 ball hearings they are a lot easier to connect and disconnect. My older connectors had 2 ball bearings and required 2 hands to connect. These can be done with one hand. These also came with extra rubber washers which you can never get enough of

I live on a 4 acre property with 8 Faucets and needed a quick connect for each. These quick connect fittings are the best I have ever had. No leaks at all, solid brass construction and easy to use even with water saving fittings on the faucet. Using my power washer is now so convenient!

Product arrived on time. The quick connect works great! Connecting and disconnecting quickly with no problem. Thanks for attention!

These work great (so far)! Solid construction with no leaks. The only drawback I can see is that the internal rubber washers will not last as long as the brass body. I love them. I’m a recent convert to quick connects and these are great for the price.

It would be nice to be able to buy just the female quick connector by its self instead of in pairs with the male connector. You always have extra nozzles, etc. to your garden hose for different applications and you do not want to have to stop and exchange out the female connector.

These feel really solid. No leaks so far, but I've only had them a week. I got a pack of 5 and it was enough to fit every hose bib and sprayer in my house with some to spare. It's not easy to tell from the picture or description but each one contains two male and two female parts plus a conector/adapter. Much better than I was expecting especially at the price, as I've seen similar items much more expensive at box stores.

I've been using them for a while now and they seem to be holding up. Only time will tell. I wish revain would add a link so we could order additional Male ends only. It would allow more flexibility switching from a hose to sprinkler, sprinkler to a hose nozzle etc without removing the male end.

Worked great , mostly used on pressure washers and i do not want them coming off and starve pump . Quality product . Way better than i have found in any store

Best deal out there, two quick change adaptors for the price of one! So far I do not see any issues with themAnd make the hookup so much easier!

I'm constantly connecting and disconnecting hoses. These make things so much simpler. Be sure to snug down the connections with a pair of pliers or a wrench so that they don't leak.

I got a set of 8 to cover several hose bibs, garden hoses and spray nozzles. I still have a couple leftover as spares. I'm very happy with them and may get another set to keep around as spares.I have the internal threaded version. The "male" part has flat edges so that you can tighten (or loosen) them from your hose or nozzle with a wrench or groove-joint pliers. I did have to get these seated well to avoid leakage on that end. My water pressure is at about 60-65psi, and I'm experiencing zero…

These quick disconnects are the first ones I have found to work well without leaks. The only improvement I can see that is needed on this product is the number of 3/4" threads on the end on the hose end of the male connector. It needs about two more threads to allow for some hose attachments that have a deeper female threading. The way it is now the male connector threads to far down into the female end of most any attachment you want at the end of your hose. Thus when the male connector is…

Having engineered products for several irrigation companies over the past 40 years I felt like I had to write a review. These couplers work well for the most part. Be careful the washer does not "bunch up" when you tighten the coupling to your hose or other device. If it does, it will leak. Check for this by looking inside the fitting after it is tight.Time will tell how durable they are but so far I they work well.